Mini Vci J2534 64 Bit
My MINI VCI cable arrived several days ago, as user manual suggestion MINI VCI is supposed to work it with Windows XP, but to contrary the popular belief, I get it working under Windows 64-bit and would like to share the instructions, I hope it will save someone a headache of dealing with dual boot and virtual machines with Windows XP.
TIS Techstream V10 Setup Instruction (!!! For 64 bit system!!! ):. The Techstream version 12. and above should be compatible with Windows 10 64 bit system. Installed and follow through instruction. Start Techstream and input Area, then shutdown.
copy Mainmenu.exe in Bin folder under installation folder. start Techstream and input registration code. unzip the MCVIDriver.msi, move the contents under “C: Program Files (x86) XHorse Electronics MVCI Driver for TOYOTA TIS”. plug in mini VCI cable. Open the Device Manager the device should be loaded. If not, right click each failing device, select Install Driver, then ”Browse my Computer” and locate to “C: Program Files (x86) XHorse Electronics MVCI Driver for TOYOTA TIS” (enable the ”include subfolders” flag). Click ”Next” and wait until drivers are installed.
You should now see two new devices: ”Universal Serial Bus Controllers USB Serial Converte” and ”Ports (COM & LPT) USB Serial Port (COMx)”. Run the FirmwareUpdateTool.exe from the “C: Program Files (x86) XHorse Electronics MVCI Driver for TOYOTA TIS”.
Click ”Device Info”, You should see the ”Device connected” screen. Now install Techstream software using “TechstreamSetupV12exe” on our software CD.
Software Registration: copy the two.ini files in ”Registration” folder to “C: Program Files (x86) Toyota Diagnostics Techstream Env Attention: It’s C: Program Files (x86) not C: Program Files, BIG DIFFERENCE!!!. Registry Hack: Run the mvci-64bit.reg file ( for download) to modify the registry for Techstream to recognize MINI-VCI under Windows x64. Run Techstream software. Go to Setup VIM Select menu and select the ”XHorse — MVCI”.
Mini Vci J2534 Driver Windows 7 64 Bit
Connect Mini VCI cable to your car‘s OBDII interface, turn ignition on, then click ”Connect to Vehicle” in Techstream. Then wait again. If everything works, you will be prompted to confirm car year/model after which you’ll get to the diagnostic interface. Important Note:. DO NOT change the “User Type” when you will run your TIS Techstream for 1st time! LEAVE IT with the Default option! “Official” Dealer/Repairer with other words.
in VIM Select option, please select the Xhorse — MVCI , not TIS Techstream VIM. If you get the following reminder while using the program: — — — — — — — — — — — — — — — — — — — — — – Register Techstream Software (S314–03) Network connection is unavailable. A network connection is required to use Techstream software. You can only connect 29 more times without a network connection before software registration is required. — — — — — — — — — — — — — — — — — — — — — You can reset that as following steps: Go to C: Program Files Toyota Diagnostics Techstream Env and find ”IT3usercustom.ini” file and look for ”Connectioncount=1” or what ever number of times you tried and just delete ”connectioncount=1”.
Click save and you should be reseted back to 30.
I bought a cheap Chinese Mini VCI J2534 cable for diagnostics and auto settings. I used it and found that you can do a lot with it through the Toyota Techstream service program. And here he came to me: Package includes the drivers for the cable and the program itself-Toyota Techstream with V10.10.018 version.
Cable for diagnosis Mini-VCI J2534 I post links for download:, drivers Then I will tell you how to install the driver and the program under Windows 7 or 8.1 x64. The instruction can be found on the Internet, but I will write it here. INSTALLATION INSTRUCTIONS Techstream on Windows 7, 8.1 – x64 bit If you bought the and there is no unpacked driver on the disk, and there is only the MVCI Driver for TOYOTA.msi installer that does not really work when installed on any Windows x64 and gives an error, and it must be installed, otherwise the sw will not work, and it does not matter. This problem can be solved by installing the MVCI Driver for TOYOTA.msi manually as follows: 1. Create a folder on drive C: Temp 2. Copy to our C: Temp folder our MVCI Driver for TOYOTA.msi file 3. With Administrator rights open and run the following command: msiexec / a “C: temp MVCI Driver for TOYOTA.msi” / qb TARGETDIR = c: temp mvci this command will extract all content from the MSI file to the C: Temp mvci folder 4. We delete the file MVCI Driver for TOYOTA.msi from the folder C: Temp mvci, it is no longer needed, we can also remove it from the folder C: Temp 5.
Mini Vci J2534
We go in C: Program Files (x86) and create there folder XHorse Electronics and in it one more MVCI Driver for TOYOTA TIS and move there all the contents from the folder C: Temp mvci 6. Connect the MINI VCI cable to the USB port. IMPORTANT: When the automatic driver installation process starts, it must be canceled and the device will not be detected. Open the Device Manager and locate the two faulty devices in the list. They will have a yellow icon indicating that Windows could not install the drivers for them. Now right click on the faulty device, select “Update Driver”, then “search on this computer” next “Browse my computer” and specify the path to “C: Program Files (x86) XHorse Electronics MVCI Driver for TOYOTA TIS “(” include subfolders “check box). Click the “Next” button and wait for the drivers to be installed. Now you should see two new devices: “Controllers USB USB Serial Converter” and “Ports (COM & LPT) USB Serial Port (COM —)”. Where instead of a line will be your figure COM port. Next, go to the path “C: Program Files (x86) XHorse Electronics MVCI Driver for TOYOTA TIS” and run the file “FirmwareUpdateTool.exe”.
In the opened program, click the “Device Info” button. You should see the “connected device” graph filled. If you see this, then your works under a 64-bit version of Windows and can be used by other programs, such as Techstream. There is a connection with the cable! Now install Techstream using the software “Techstream.exe” of any version. after installation do not run it yet. To activate it, you need to change the TISFunction = 1 line in the C: Program Files Toyota Diagnostics Techstream Env IT3System.ini file and change it to “0” and save the file. Now you need to make the program see the cable So that Techstream sees MINI-VCI under Windows x64, the Registry should be changed like this: 1.
Step up all in 2014 free online. All-stars from the previous Step Up installments come together in glittering Las Vegas, battling for a victory that could define their dreams and their careers.